Safety Tips You Must Essentially Follow While Using A Stump Grinder

Stumps are not only an eyesore but also hazardous for people on the property. This is why it is advisable to remove them as thoroughly and quickly as possible.

stump grinding buffalo ny


Stump removal and stump grinding Buffalo NY are the two most popular methods for removing stumps. But certified arborists generally find using stump grinders a more efficient method to clear stumps.

Although stump grinders are very useful tools, precaution needs to be taken while operating them. So, before you start working on the stump grinder, read the safety tips below. This will make sure you get the job done efficiently and safely.

Stump Grinding Safety Tips

Prepare The Work Site

Before pumping up the stump grinder, prepare the site by removing rocks and other debris from around the stump. Then, cut the stump as close to the ground as possible by using a chainsaw.

Move The Stump Grinder Into Position

After preparing the work area, place the stump grinder in the right position to start grinding. Make sure the angle is comfortable for working.

You may have to change the angle and height multiple times while grinding the stump. But make sure to avoid changing the position of the handle when the machine is on. Utilize the locks on the wheel if and when necessary.

Grind A Portion Of The Stump

Change the angle of the grinder every time you drop about 80-90 millimeters on the stump. This helps to get the work done more quickly.

Reposition The Equipment

Reposition the stump grinder for more efficiency. Push the stump grinder towards the centre of the trunk and lock its wheel in place once the stump is reduced to ground level. Set the handle of the machine at a proper height and grind it until you end up with a cleared area.

Cover the Cleared Space With Soil

After completing the work, switch off the ignition and make sure the machine is turned off completely. Then, fill the hole with soil and wood chips to avert any safety hazards.

Additional Safety Tips

      Use safety gear – goggles, gloves, and earplugs

      Always unplug the stump grinder machine when not in use

      Look out for the people and trees nearby

 

Hire Professionals For Safe & Efficient Stump Grinding

DIY stump grinding isn’t “hard” per se. However, without proper expertise, you may find yourselves working much less accurately than a pro.

So, to avoid significant errors in the project, it is recommended to hire a professional stump grinding Buffalo NY service like Tree Soldiers. Their experts have the knowledge and expertise to get the stump grinding work done quickly and safely.

Connect with the professional today!

Comments

Popular posts from this blog

Common Mistakes to Avoid When Removing Trees

Should You Wait for the Tree Removal Cost To Go Down?

Do You Love Tree-Care? Then Let’s Know About Tree Trimming and Pruning Today!